|
The Reference Standard has a single- and three-phase version of
precision meter for electrical power and energy measurement. The
Reference Standard is designed to meet all requirements put on
a reference standard in a single- and three-phase electricity meter
testing and calibration systems. The Reference Standard can be set
to any true or artificial mode of operation in three phase system and
is capable to evaluate individual quantities in any phase and threephase
cumulative quantities as well.
Reference Standard is based on precision 24-bit A/D conversion and
on digital signal processing technology, enabling accurate evaluation
of all main and informative quantities. Beyond measurement of all
kinds of power, voltage, current and phase, the meter measures
a harmonic content and a distortion of the input signals.
The meter constant of Reference Standard generating valueproportional
impulses on the frequency output are free
programmable. This unique feature along with the extremely high
maximum output frequency, exceeding 2 MHz allows precision error
evaluation of tested meters even within the shortest integration
periods. The impulse output can be assigned to various quantities.
Additionally, the impulse output can be set to generate any precise
constant frequency for testing purposes.
The Reference Standard is equipped with three fully independent
differential voltage input circuits. Therefore the meter can be
configured to evaluate signals on three independent channels. This
feature in combination with possibility to assign the impulse output to
any combination of the input channels, enables application of the
device for example in single-phase system with one channel as
a reference, while the free channels can monitor additional
information, like power consumption of the current and voltage
circuits or contact error in the test circuit.
Reference Standard 1x10 (front view)
Optional equipment permits usage of the Reference Standard with
three independent individually programmed impulse outputs, what
enables to triple the testing capacity of the three-phase test system,
when testing single-phase meters.
Available Models
| Typ |
Trieda presnosti |
Fázy |
Displej a klávesnica |
| RS 1110A |
0.05 |
1 |
NO |
| RS 2110A |
0.05 |
1 |
YES |
| RS 1310A |
0.05 |
3 |
NO |
| RS 2310A |
0.05 |
3 |
YES |
| RS 2110E |
0.02 |
1 |
YES |
| RS 2310E |
0.02 |
3 |
YES |
| RS 2110S |
0.01 |
1 |
YES |
| RS 2310S |
0.01 |
3 |
YES | |
|
